Panasonic GTWIN Reference Manual page 76

GTWIN Reference Manual
4. Press [OK]
In the following cases it is not possible to copy PLC program files from the SD memory card to
the PLC:

When there is no PCE file on the SD memory card

When the PLC you are copying the files to has no comment
memory

When the PLC is in run mode
When there is no PCE file on the SD memory card
When you are using FPWIN Pro and there is no PCE file on the SD memory card, the
following screen will appear:
In this case, check the contents of the SD memory card. Either the PCE file has the wrong file
name (it must be the same as the corresponding FP file) or it has not been created yet. If the
PCE file has not been created yet, start FPWIN Pro and create the FP and PCE file with the
commands listed above.
2.6 SD Memory Card Functions
75