Copy Plc Program Files To The Plc - Panasonic GTWIN Reference Manual

GT Panel System Menu
5. Press [OK] to update the firmware
Press [ESC] if you do not want to update the firmware. In this case, you cannot
copy the GT screen data to the GT.

2.6.5 Copy PLC Program Files to the PLC

To copy PLC program files from the SD memory card to the PLC, proceed as follows:
1. In the SD memory card menu, select [SD  PLC]
The list of files on the SD memory card is displayed.
2. Press the file name you wish to copy
or
Press the
3. Press [Copy]
A confirmation screen appears. The name of the PLC program file selected is
displayed for your information.
74
or button to select a file
GTWIN Reference Manual