Change Device - Panasonic GTWIN Reference Manual

Menus

4.1.9.4 Change Device

Use this dialog to change multiple devices at once.
Save your project before executing a device change as original data cannot be
restored once you select [Execute].
1. File  Utility  Change Device
The "Change Device" dialog appears.
2. Make your settings and choose [Execute]
Settings
Field
Device Setting
Change Method
122
Description
Specifies "Bit Device" or "Word Device" as well as the start and end device under "Source"
and the destination device under "Destination". If you only want to change one device
number, e.g. DT100, you still have to enter DT100 in both fields next to "Source".
Specifies the change method.
 Source <==> Destination (default): Device numbers will be exchanged, i.e. after
executing the change, objects using the source device use the destination device and
vice versa.

Source ==> Destination: Device numbers will be changed, i.e. after executing the
change, objects using the source device use the destination device. Objects using the
destination device will not be changed.
GTWIN Reference Manual