GT Panel System Menu
When the PLC you are copying the files to has no comment memory
This problem only occurs when the PLC program files have been created with FPWIN Pro.
If you are using an FP0 or FPe: Press [OK]
If you are using another PLC, check the file.
2.6.6 Copy PLC Program Files to the SD Memory Card
To transfer PLC program files from the PLC to the SD memory card, proceed as follows:
1. In the SD memory card menu, select [PLC SD]
A screen is displayed where you need to enter the file name.
2. Enter a file name
The file name can be up to 8 characters long.
3. Press [ENT]
A confirmation screen appears.
76
GTWIN Reference Manual