Panasonic GTWIN Reference Manual page 82

GTWIN Reference Manual
4. Select [OK]
5. Check whether the button [FP Monitor] is available in the settings dialog of
the GT panel system menu (see p. 58)
The button only appears if the FP monitor screen data has been successfully
transferred to the GT. Only then can you start using the FP Monitor functions (see
p. 83).
Via SD memory card
1. Connect the SD memory card reader to the PC
2. File  Utility  Create SD Memory Card File
3. Select the drive with the SD memory card reader
4. Activate the checkbox "FP Monitor"
5. Select an existing file name or enter a new one
6. Select [OK]
7. Insert the SD memory card into the GT
8. Open the system menu on the GT
9. Select [Setting Menu]
10. Select [SD Memory Card]
The screen with the SD memory card functions is displayed.
2.7 FP Monitor
81