Restrictions - Panasonic GTWIN Reference Manual

GTWIN Reference Manual

Make sure to check the logo of the SD memory card printed on the GT and
the GT version so that you use the correct SD memory card.

Do not use a SD memory card with a memory capacity higher than indicated
in the table. Data on the SD memory card may be damaged.
Reading time of the SD memory card
When an SD memory card is inserted into the GT, the card will be read. While the SD memory
card is being read, the GT cannot be operated.
The reading time varies according to the memory capacity of SD memory card.
SD memory card capacity
2GB or less
4GB
8GB
12GB
16GB
32GB

2.6.2 Restrictions

Amount of data that can be copied
The following restrictions apply when you copy data to or from the SD memory card:
Type of data
GT screen data
PLC program files
It does not matter if the program files were created with different programming
tools.
Password handling
It is possible to set a password setting on both the GT and the PLC. When a password has
been set on the GT or the PLC, the following restrictions apply when you copy data to or from
the GT:
Rough estimate of reading time
Approx. 5 to 10 seconds
Approx. 5 to 15 seconds
Approx. 15 to 25 seconds
Approx. 20 to 35 seconds
Approx. 30 to 45 seconds
Approx. 60 to 90 seconds
No. of data that can be copied
16 files
16 (see note)
2.6 SD Memory Card Functions
69