Connecting The 5V Type To The Tool Port Of A Compact Plc - Panasonic GTWIN Reference Manual

GTWIN Reference Manual
7.4 Connecting the 5V Type to the TOOL Port of a
Compact PLC
The 5V DC type is powered via the TOOL port cable.
Please read the cautions regarding the power supply before connecting (see p.
252).
Communication format settings
System register no.
410
412
413
414
For more information on the communication settings, please refer to the GT
Series User Manual.

7.4 Connecting the 5V Type to the TOOL Port of a Compact PLC

Item
Modem connection
Sending data length
Parity check
Stop bits
End code
Start code
TOOL port baud rate
setting
Value set
1
No modem connection
8 bits
Yes, Odd
1 bit
CR (fixed)
No STX (fixed)
9600 bps
253