Recipe Control; Alarm History Setting - Panasonic GTWIN Reference Manual

GTWIN Reference Manual
1.6 GT Configuration

1.6.9.1 Recipe Control

When the GT terminal writes recipe data to a PLC or reads it from a PLC, the recipe control
function stores the following information in the control device and the following 3 registers.
Please note, within the Word address "n", bits 0-2 are set or reset by the user or PLC. Bits 8-F
are automatically set or reset.
"n" represents the starting word address you set for the device on the GT Configuration
dialog's recipe tab. For example, if you selected the internal GT register WGR10 as the
starting address for recipe control, n+1 will be stored in WGR11, n+2 in WGR12 and n+3 in
WGR13.

1.6.10 Alarm History Setting

Most GT models can monitor two groups of alarms. This section explains how to select the
group for monitoring alarm history and start the alarm history function.
41