Panasonic GTWIN Reference Manual page 219

Parts and Their Functions
Basic Setup tab with default values when "Method to Draw" is "Block"
Basic Setup configuration parameters for block mode
Field
Method to Draw
Number of Lines
Bar Graph
Reference Data
Unit (only visible when
you activate "SD Card
(Logging Data)"
Note: see explanation
following table.
Direction
Update Device
Use Drawing Complete
Bit
218
Description
Block
Specifies the number of lines.
Note: In the element setup tab, you still have to define a reference device (starting
address) for each line.
Select whether to display one or more lines as bar graphs (minimum: 1 line).
Specify whether to display data from a device or logging data from an SD card (see p.
208).
 When you select "Device", specify the "Reference Device" on the line settings tab
(see p. 210).
 When you select "SD Card", the field "Unit" appears (see p. 211). Specify the time
unit for the logging data.
 1 Year (Month unit): Displays the data for 12 months by month in 12 plots. The
graph starts with January.
 1 Month (Day unit): Displays the data for 31 days by day in 31 plots.
 1 Day (Hour unit): Displays the data for 24 hours by hour in 24 plots.

Number of Plots: Specify the desired number of plots on the right side under
"Number of Plots".
You can, for example, display the data for 1 hour beginning with the first value of
the hour and continuing until the number of plots has been reached.
No mathematical calculation can be performed on the data, i.e. no mean, total or
accumulated value.
Specify in which direction the reference devices sampled are displayed.
Specify the device used to trigger updating the line. Subsequent devices trigger
subsequent lines (see "Update Device" at the end of this section).
Sets a bit when the graph has been updated (see "Update Device" at the end of this
section).
GTWIN Reference Manual