Panasonic GTWIN Reference Manual page 89

GT Panel System Menu
Entry monitor
Use this monitor to enter values for up to 32 devices (word and bit devices). The device types,
device numbers, and display formats of the devices are held even after you turn off the power.
The example screen shows the following device values:
Option Description
Device type Displays the currently selected device type. Touch the button to change the device type.
Displays the number of the device (address). To enter a number, touch the number field and
Device No.
wait for the keyboard to display. Alternatively, use the [Up]/[Down] buttons to select a device.
 For word devices: device value in the display format selected.
 For bit devices: bit status (ON = light/OFF = dark)
Device value
Touch the value or bit button to change it.
Display format Only for word devices. Select which display format (see p. 85) should be used.
[Up]/[Down] Use the buttons to scroll through the list of devices.
Forced On/Off
Use this monitor to forcibly turn on or off up to 16 bit devices. The addresses of the devices
entered in this monitor are held even after you turn off the power.
88
CAUTION
Hazardous situation!
Forcing inputs/outputs is extremely hazardous.
Make sure to pay sufficient attention to the
status of peripheral devices and equipment
before executing this function.
Device Device Device
type No. value
DT 100
DT 200
Bit 0 – 3:
ON
R 100
Bit 4 – 7:
OFF
Device Device
type No.
R 100
Y 100
X 100
GTWIN Reference Manual
Display format
US1 (decimal, 1 word,
50
unsigned)
S1 (decimal, 1 word,
-100
signed)
—
Device value
Forced ON
Forced OFF
Not forced, i.e. free to be
controlled by the PLC.