Panasonic GTWIN Reference Manual page 230

GTWIN Reference Manual
When you draw (see p. 129) lamp parts, you should design the lamp's appearance in the
ON-state (Edit-ON) and the OFF-state (Edit-OFF).
Custom lamp and message parts encompass much of the functionality of normal lamp parts
(see p. 188) and message parts (see p. 190). However, for custom lamp parts and custom
message parts, the configuration tabs differ considerably. The table will help you find your
way quickly.
Tab
List
Replacement
Display/Hide
Reverse/Blink
Operation Security
Element Setup
Description
You can assign the configuration settings a name.
Below this field, a list displays the current configuration settings.
Use the replacement tab (see p. 230) to configure how the display switches. The
replacement tab for the custom lamp and custom message parts functions exactly the
same as the custom switch part's replacement tab, except that there is no "Push SW"
option button.
Display: part is displayed.
SW Display/Hide. Under conditions, select [Setup] to specify the conditions when to
display or hide the part.
The reverse/blink tab only applies to character strings (see p. 98) that you have drawn
on the custom part. You can specify how the character string behaves, e.g. if it blinks,
etc., under normal conditions or when certain conditions are met.
Set the security level to restrict the display and/or operation of the part.
Visible if on the Replacement tab, the check box "Change Attribute for Every
Appearance" has been activated. Pressing [Setup] calls up the same tabs described
above in this table.
5.11 Custom Parts
229