Gt Model Convert - Panasonic GTWIN Reference Manual

Menus

If the original PLC type's device numbers exceed the range allowed for the
new PLC type, they will be converted to the maximum device number
allowed by the new PLC. Before you convert to the new PLC model, we
recommend adjusting the device numbers for the original PLC type so that
they fall within the range supported by the new PLC type after conversion.
PLC Model Convert, mapping word device addresses

4.1.9.2 GT Model Convert

You can convert screen data from one GT model to another. The following restrictions apply:

It is only possible to convert screen data to a new GT model whose screen size is
equal to or larger than the original GT model. Only compatible GT models are
available in the drop-down list under File  Utility  GT Model Convert.

The number of parts that can be converted is limited to less than 256 parts for most
GT models and depends on whether you are using custom parts, keyboard or alarm
list parts.

Before you start the conversion, create a backup of the file with the
command File  Save As.

Once the conversion has been performed, it cannot be undone.
118
GTWIN Reference Manual