Setup For Individual Parts - Panasonic GTWIN Reference Manual

GTWIN Reference Manual
7. Enter a translation for the string displayed in column "Language0" [Enter]
GTWIN checks the length of the translated string because the translation
cannot be longer than the part itself. If the translation is too long, a warning
message appears. In that case, you need to enter a shorter translation, edit the
part size, and return to the translation. This is why we recommend creating
parts with a maximum size when you set up multilingual screens. Alternatively,
you can change the font size of the part, but this also requires leaving the list of
multilingual strings.

4.7.8.2 Setup for Individual Parts

This function allows you to enter translations for one part. The part size is adjusted
automatically to fit the longest language when you click [OK].

As the part size is adjusted automatically to fit the longest language, you
need to check afterwards whether the adjusted part overlaps other parts on
the screen now.

Please note that you can only set the font type and size set for language 0
and these settings are used for all other languages as well.
1. Double-click the part you wish to edit
2. Select the "Character" tab
By default, the main language (Language0) is displayed.
4.7 Start Editor Menu
163