Panasonic GTWIN Reference Manual page 26

GTWIN Reference Manual
Basic Communication Area Map
The following table provides a more detailed explanation for the bit areas for the various GT
models.
Item
Buzzer
Forced display flag
Backlight valid flag
Backlight flashing
Backlight color
Touch sound
Explanation
Turns on the buzzer.
0: Screens can be changed at will.
1: The screen specified as a number in the Word position n+0 of the PLC is forcibly
turned ON and held.
When the bit is turned on, backlight flashing/backlight color control becomes effective.
0: lighted (normal), 1: flashing
GT01/GT02G/GT05G/GT12G
3-color LED backlight
GT01 1-color LED backlight
GT02L/GT03-E/GT05S/GT32-E
1-color LED backlight
GT01R/GT02M/GT05M/GT12M
3-color LED backlight
GT11 3-color LED backlight
GT11 1-color LED backlight
GT03-E, GT05S, GT21, GT30,
GT32, GT32-R, GT32-E
1: touch sound activated, i.e. switches will produce a beep when pressed if so defined.
0: touch sound not activated.
1.6 GT Configuration
00: Off, 01: Green, 10: Red, 11: Orange
00: Off, 01: Lighted, 10: Off, 11: Lighted
(weak)
00: Off, 01: Lighted, 10: Lighted, 11: Lighted
00: Off, 01: White, 10: Red, 11: Pink
00: Off, 01: Green, 10: Red, 11: Orange
00: Off, 01: Lighted, 10: Off, 11: Lighted
(weak)
00: Off, 01: Lighted, 10: Lighted, 11: Lighted
25