GTWIN Reference Manual
4. Select the number of digits
If a password already exists and you only want to change the password length,
you need to delete the password first and then set a new one.
5. Enter the new password
6. Select [ENT]
When you create a new password without actually entering anything on the
password input screen, the default password will be used. The default password
is 0000 for a 4-digit password and 8 spaces for a 8-digit password.
Deleting a password
If you want to change from a 4-digit to an 8-digit password or vice versa, you need to delete
the existing password first.
1. Select [Cancel Password]
The password-input screen appears. Its appearance depends on whether the
PLC has a 4-digit or 8-digit password.
If the PLC is not password-protected, the password input screen will not appear.
2. Enter the password
3. Select [ENT]
The following screen appears.
2.7 FP Monitor
91