Connecting To The C-Net Adapter - Panasonic GTWIN Reference Manual

GTWIN Reference Manual

7.12 Connecting to the C-NET ADAPTER

Connection method
Setting the communication conditions
GT communication settings (Set via GTWIN)
Item Value set
Baud rate 19200bps
Sending data length 8 bits
Parity check 1 bit
Stop bit Odd
Communication settings on the PLC side
The communication settings for the GT unit and PLC should match. Check each with the
corresponding software tool.
For more information on the communication settings, please refer to the GT
Series User Manual.
C-NET adapter setting
Set the termination (TERMINATE) to on.
7.12 Connecting to the C-NET ADAPTER
273