Panasonic GTWIN Reference Manual page 226

GTWIN Reference Manual
Field
Number of Keys
Change the Keyboard
Using Japanese, Chinese, or Korean characters
The following GT models support the display of Japanese (Hiragana, Katakana and Kanji
(Chinese) characters), Chinese, and Korean for data parts. The input of one-byte Kana is
available with the Kana keyboard when you open the parts library "KANAKEY.SPL" via Parts
 Open Parts Library.
Usable GT
GT05 Ver1.40 or later
GT12 Ver1.10 or later
GT32 Ver1.50 or later
All GT versions released in 2010 and after.
Description
Key Setup:
 Input Value: specify value for the key.
 Input Kana: you can enter 1:1 size Katakana characters. Katakana input is valid if
you specified "ASCII" or "Japanese (Shift JIS)" for the data format for the data part.
 Input Control: specify control command for the key, e.g. clear, backspace, +/-, etc.

Change the Keyboard: Specify whether to change to the "previous screen", i.e.
previous keyboard, or the "next screen", i.e. next keyboard. See also the field
"Change the Keyboard" below.
Specify the number of vertical columns and horizontal rows for the keyboard.
Turn "On" to design numerous "replacement" keyboards for one screen. You can
maneuver between keyboards by defining the key to "change the keyboard" (see "Key
setup" under the "Image" field above.)
5.10 Keyboard Parts
225