Data Logging - Panasonic GTWIN Reference Manual

GTWIN Reference Manual
If the value for the reference device specified here changes, the screen display is
changed to a language number between 0 and 15 depending on the value.
"Reference Device" = "DT100"

4.7.9 Data Logging

For certain GT models, data logging is available. Data from specified devices is collected and
stored in the GT unit's SRAM and written as log files to an SD memory card in CSV format
when specified.
You must install the backup battery in the GT unit because the clock setting is necessary in
order to trigger logging activities.
DT100 Language No. specified by PLC in HEX format (GT
reads register from the PLC)
DT101 No. of the language currently displayed in HEX format
(GT writes to PLC register)
4.7 Start Editor Menu
169