Custom Lamp And Custom Message Parts - Panasonic GTWIN Reference Manual

Parts and Their Functions
Tab
Operation
Option
Display/Hide
Valid Condition
Reverse/Blink
Operation Security
Element Setup

5.11.2 Custom Lamp and Custom Message Parts

Except for the default settings on the "Replacement" tab, the configuration tabs for custom
lamp and custom message parts are the same. Though lamp parts are usually graphic parts
and message parts are character strings, they both function the same way.
228
Description
Refer to function switch part (see p. 184), Basic Setup tab
 SW Sound: Select whether a sound is produced when a switch part is pressed.

Reversed When Pressed: Select whether the image "reverses" when the switch is
pressed. The dark areas will become light, and the light areas dark.
Switch part (see p. 182), Display/Hide tab.
Switch part (see p. 182), Valid Condition tab.
The reverse/blink tab only applies to character strings (see p. 98) that you have drawn
on the custom switch.
You can specify how the part appears, e.g. if it blinks, etc., under normal conditions or
when a certain condition is true.
Press [Setup] to choose from among an extensive range of conditions.
The setting for "When Condition is True" takes priority over the setting for "Normal".
Set the security level to restrict the display and/or operation of the part.
Visible if on the Replacement tab, the check box "Change Attribute Every Screen" has
been activated. Pressing [Setup] calls up the same tabs described above in this table
and allows you to configure the custom part's behavior for each reference device.
GTWIN Reference Manual