Using Fp Monitor - Panasonic GTWIN Reference Manual

GTWIN Reference Manual

2.7.3 Using FP Monitor

FP Monitor main screen
Item
System Register
Error
Device
Password
Shared Memory
Ver x.xxx
F
Run
Prog

When you call up the FP Monitor using a function switch on the GT screen,
all functions except flow display and multi language are active. However, if
you call up the FP Monitor via the settings dialog in the GT panel system
menu (see p. 58), all functions besides FP Monitor are suspended.

When communication between PLC and GT cannot be established, the FP
Monitor does not function.
Description
Displays the screen for reading and setting PLC system registers.
Displays the screen for monitoring PLC errors.
Displays the screen for reading and setting PLC data registers.
Displays the screen for setting or removing PLC passwords.
Displays the screen for reading values from the shared memory.
Displays the version number of the FP Monitor
Only appears and flashes if devices have been forced ON or OFF.
Switches the PLC to RUN mode. The button is available on all screens except input
screens.
Switches the PLC to PROG. mode. The button is available on all screens except input
screens.
2.7 FP Monitor
83