Control Setup For Data Logging - Panasonic GTWIN Reference Manual

Menus
Field
Scaling
Reference Order

4.7.9.3 Control Setup for Data Logging

You can control certain data logging functions from a PLC by activating record area control
and specifying the initial address in the control device. Following is a description of the record
control areas.
Area
Trigger stop
PLC  GT
Logging file creation
176
Description
For certain data formats, scaling is available. When activated, you can set max.
and min. limits and scale the data between the PLC and GT.
For example, if you set the max. value for the GT range to 100 and the max.
value of the PLC range to 10, the GT values will be scaled, i.e. divided by 10
when written to the SD memory card.
Values beyond the limits will be set to the limit value and then scaled.
Available when ASCII or Japanese (Shift JIS) are selected as the data format.
Specify the order for referencing such data.
Description
Deactivate the logging trigger and stop logging data.
Turns on when logging file is being created. Use it to determine the file
GTWIN Reference Manual