GT Panel System Menu
2.3 Clear Memory
Clear SRAM
Clearing the SRAM will initialize:
line graphs
PLC device hold data
alarm history
internal GT device data
Clear FROM
Clearing the FROM will initialize:
screen data
configuration settings saved in the main unit's memory
Copy GT
You can copy the firmware and screen data from an RS232C type GT unit (only!) to an
RS232C/RS422 type GT unit of the same model series. Connect the COM port of the source
GT to the Tool port of the target GT.
NOTICE
Loss of data
If the GT units are not connected correctly, the source unit's screen
data will be deleted!
62
GTWIN Reference Manual