Panasonic GTWIN Reference Manual page 220

GTWIN Reference Manual
Field
Number of Plots
Data parts in combination with a keyboard part are used to enter 2 digits for the reference
device for the year, month, day and hour. In the following table for the line graph part under
Element Setup, GDT100 is specified as the unit device.
Reference data for
SD card, Unit
1 Year (Month unit)
1 Month (Day unit)
1 Day (Hour unit)
Number of plots
Description
In block mode, the number of plots = number of reference devices sampled and
displayed simultaneously on the line. If the number of plots is greater than the number
of devices sampled, the extra plots will be displayed as 0. The max. value will be
displayed for all reference device values that exceed the max. value specified in the
element setup tab.
Tip: Under "Element Setup  [Setup]  Color and Form", specify a "mark" to clearly
identify each reference device sampled.
x
x
x
Data part reference
device, example
GDT100:09
GDT100:09
GDT101:10
GDT100:09
GDT101:10
GDT102:11
GDT100:09
GDT101:10
GDT102:11
GDT103:12
DT100
DT101
DT102
x
DT103
DT104
x
Description
Data is sorted and read by the month.
Data is sorted and read by the day.
You need 1 data part for GDT100 (the year 2009)
and 1 data part for GT101 (the month October).
Data is sorted and read by the hour.
You need 1 data part for GDT100 (the year 2009), 1
data part for GT101 (the month October), and 1
data part for GDT102 (the day 11th).
Data is sorted and read by the minute.
You need 1 data part for GDT100 (the year 2009), 1
data part for GT101 (the month October), 1 data
part for GDT102 (the day 11th), and 1 data part for
GDT103 (the hour 12:00).
5.9 Line Graph Parts
219