Panasonic GTWIN Reference Manual page 71

GT Panel System Menu
Option name
[SD GT]
[GT  SD]
[SD  PLC]
[PLC SD]
PLC models available for program file transfer
The transfer of PLC program files is available for the following PLC models:

FP-X

FP

FP0

FP0R

FP2

FP2SH

FP-e

It is not possible to copy the comments in PLC programs created with
FPWIN GR.

When you copy PLC program files from the PC where you have installed the
PLC programming software to the SD memory card, you need to create the
folder \plc_data in the root folder first. If the PLC program files are not
located in the correct folder, you cannot copy them to the PLC.
Command for file
creation
File extension
Length of file name
Content
70
Type of data copied
GT screen data
PLC program files
FPWIN GR
File  Save
*.FP
PLC ladder programs,
system register
information
Restriction
When you select the copy command, the password
entry screen is displayed. Enter the password set on
the GT to copy the screen data (see p. 113).
It is not possible to copy the GT screen data.
It is not possible to copy the PLC program files.
FPWIN Pro
Online EPROM File
Services  Save in FP
Hex Format
*.FP (note 2)
8 alphanumeric characters
PLC ladder programs,
system register
information
GTWIN Reference Manual
Extras Backup Project
(select *.pce for the file type,
note 1)
*.PCE (note 2)
FPWIN Pro project files
(except libraries)