Working With Gt_Sd_Reader - Panasonic GTWIN Reference Manual

GTWIN Reference Manual

8.2 Working with GT_SD_Reader

To start GT_SD_Reader, please proceed as follows:
1. Connect the PC which has GTWIN installed and the GT unit with a USB
cable
2. Switch on the power of the GT unit
3. Start  Programs  Panasonic-ID SUNX Terminal  GTWIN  Tools 
GT_SD_Reader
The main screen of GT_SD_Reader is displayed. The left side shows a tree with
the folder structure on the SD memory card. The GT model displayed at the top of
the tree.

When the PC is not connected to the GT or the communication settings are
wrong, the communication setting dialog is displayed instead of the main
screen of GT_SD_Reader. In this case, check the connection between the
GT and PC and the communication settings.

It is not possible to display other than GT files and folders on the SD
memory card.
GT_SD_Reader settings
The following settings should be made before managing data with GT_SD_Reader.
Option
Communication Settings
Language Settings
Folder Settings
Description
Use the following settings for the communication between PC and GT.
 COM Port: USB

Wait: 5 (seconds)
Sets the menu and dialog language for GT_SD_Reader.
Sets the target folder on the PC to which files are saved when you upload
from an SD memory card.
8.2 Working with GT_SD_Reader
289