Display Data" Options On "Display" Tab - Panasonic GTWIN Reference Manual

GTWIN Reference Manual
Tab Field
display the
Reverse/Blink
setting
options)
Color and Form
Display Fixed Comment
Line
Data Format
(select
Max./Min.
[Setup] to
display the
Value (Position)
setting
options)
Line Type/Color
Display fixed line in a line graph part

5.9.1.1 "Display Data" Options on "Display" Tab

When "Bar Graph" = "Yes" on the "Basic Setup" tab
Bar Width
Margin between Bars
Margin from Edge
Plot Interval
Description
You can specify how the part appears, e.g. if it blinks, etc., under normal
conditions or when a certain condition is true.
Press [Setup] to choose from among an extensive range of conditions.
The setting for "When Condition is True" takes priority over the setting for
"Normal".
Line Type/Color/Mark. Specify the thickness and the color of the line as
well as a distinguishing mark, if necessary.
Add a comment here if desired.
Select the same data format as the one specified under "Line Settings".
Set the maximum/minimum value for the fixed line.
Set the position of the fixed line in the graph. The value has to be within
the range specified by "Max./Min.".
Specify the thickness and the color of the line.
Specify width of the bars (see below).
Specify the distance between the
individual bars.
Specify the distance from the line graph
frame
Read-only field. Value is set automatically
by the system
5.9 Line Graph Parts
When "Bar Graph" = "No" on the
"Basic Setup" tab



Specify the distance between each plot
displayed in the line graph.
209