Technical Data Common To All Models; Hardware Specifications; Environmental Conditions - Panasonic HM500 Series Instruction Manual

Technical data common to all models

5. Technical data common to all models
5.1 Hardware specifications
Touch screen technology
Back-up battery
Fuse
Serial Port
User memory
Recipe memory
Real-time clock
Accuracy real-time clock
(at 25°C)
5.2

Environmental conditions

Operating temperature
(surrounding air temperature)
Storage temperature
Operating and storage humidity
Vibrations
Shock
Degree of protection
* The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the stan-
dards shown in the "Environmental conditions". Even though the level of resistance unit is equivalent to these
standards, oils that should have no effect on the can possibly harm the unit. This can occur in areas where
either vaporized oils are present, or where low viscosity cutting oil are allowed to adhere to the unit for long
periods of time. If the front face protection sheet on the becomes peeled off, these conditions can lead to the
ingress of oil into the and separate protection measures are suggested.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from
the panel, the original degree of the protection cannot be guaranteed.
Resistive
3V 50mAh Lithium, rechargeable, not user-replaceable, model
VL2330.
Automatic
RS232, RS485, RS422 software configurable
• Flash 128Mb for HM504 and HM507
• Flash 256Mb for HM510 and HM513
Flash
Clock/Calendar with backup battery
<100ppm
0 – +50°C
-20 – +70°C
5 – 85% RH not-condensing
5 – 9 Hz, 7mm
p-p
9 – 150Hz, 1g
± 50g, 11ms, 3 pulses per axis
IP66 front panel (see note)
7
EN 60068-2-14
EN 60068-2-14
EN 60068-2-30
EN 60068-2-6
EN 60068-2-27
EN 60529