Sensor (Adf Registration) Removal - Lexmark X95x Series Service Manual

7558-xxx
Position the ADF feed roller in its uppermost position to allow access to the ADF sensors, as shown in the
9.
following image.
Move the brackets out from under the ADF feed roller.
10.
Release the hooks securing the sensor (ADF pre-registration) (C).
11.
Remove sensor (ADF pre-registration).
12.

Sensor (ADF registration) removal

Open the ADF top door.
1.
Remove the ADF front cover. See
2.
Service Manual
4-250
"ADF front cover removal" on page 4-216.
Previous
Next
Go Back