Sensor (Punch Hole Select), Sensor (Punch Cam Front), And Sensor (Punch Unit Hp) Removal - Lexmark X95x Series Service Manual

7558-xxx
Release the hooks securing the sensor (punch carriage shift HP) (C) to the bracket (A).
5.
A
6. Remove the sensor (punch carriage shift HP) (C).
Sensor (punch hole select), sensor (punch cam front), and sensor (punch unit HP)
removal
1. Open the finisher front door assembly.
Remove the rear upper cover. See
2.
3. Remove the punch carriage assembly. See
Remove the screw securing the bracket (A) to the punch unit assembly (B).
4.
Service Manual
4-400
C
"Rear upper cover removal" on page
B
"Punch carriage assembly removal" on page
A
B
4-383.
4-378.
Previous
Next
Go Back