Warning: The lower portion of the auger (B) is prone to damage. Extra care is required in handling this part.
Remove the M toner auger.
13.
Re-installation note: Ensure that the rubber sleeve (C) is attached properly to prevent toner spillage.
Main power GFI interface removal
1.
Remove the rear upper cover. See
Remove the rear lower cover. See
2.
C
"Rear upper cover removal" on page
"Rear lower cover removal" on page
7558-xxx
A
B
4-19.
4-17.
Repair information
4-121
Previous
Next
Go Back