7558-xxx
Disconnect the connector from the sensor (upper media exit) (A).
5.
6.
Release the hooks securing the sensor (upper media exit) (A) to the finisher.
Remove the sensor (upper media exit) (A).
7.
Stacker bin lift motor assembly removal
Remove the rear upper cover. See
1.
2.
Remove the rear lower cover. See
Loosen the four screws securing the plate (A).
3.
Move the plate (A) toward the right as shown.
4.
Service Manual
4-410
Rear
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
A
Connector
Left
4-383.
Rear
A
Previous
Go Back
4-426.
Next