Sensor (Adf Scan Width 2) Removal - Lexmark X95x Series Service Manual

Position the ADF feed roller in its uppermost position to allow access to the ADF sensors, as shown in the
9.
following image.
Move the brackets out from under the ADF feed roller.
10.
Release the hooks securing the sensor (ADF scan width 1) (C).
11.
Remove sensor (ADF scan width 1).
12.

Sensor (ADF scan width 2) removal

Open the ADF top door.
1.
Remove the ADF front cover. See
2.
"ADF front cover removal" on page
7558-xxx
4-216.
Repair information
4-257
Previous
Next
Go Back