Bridge Drive Motor Removal - Lexmark X95x Series Service Manual

7558-xxx
Remove the two screws (A) securing the bridge decurler top cover to the machine.
4.
Remove the bridge decurler top cover.
5.

Bridge drive motor removal

Remove the bridge unit assembly. See
1.
Remove the bridge decurler rear cover. See
2.
3. Remove the bridge unit right cover. See
Remove the four screws (A) securing the bridge drive motor to the machine.
4.
Service Manual
4-306
"Bridge unit assembly removal" on page
"Bridge decurler rear cover removal" on page
"Bridge decurler right cover removal" on page
4-308.
4-304.
4-305.
Previous
Next
Go Back