Sensor (Booklet Knife Folding) Removal - Lexmark X95x Series Service Manual

Remove sensor (booklet front tamper HP) (A).
5.

Sensor (booklet knife folding) removal

Remove the booklet unit assembly. See
1.
1. Remove the Complete booklet unit assembly left cover. See
on page 4-337.
Rotate knife sector gear clockwise until the flag is in the folding sensor position.
2.
Remove one screw securing the sensor (knife HP sensor & knife folding sensor) from the knife frame
3.
assembly.
Disconnect the connector from the sensor (booklet knife folding) (A).
4.
Left
"Booklet unit chassis removal" on page
A
Connector
"Booklet unit assembly left cover removal"
7558-xxx
4-338.
Repair information
4-387
Previous
Next
Go Back