Fuser/Lower Redrive/1St Btr Retract Motor Removal - Lexmark X95x Series Service Manual

Release the harness from the clamp.
8.
Remove the three screws (E) securing the fuser pressure roll retract motor to the machine.
9.
10. Remove the fuser pressure roll retract motor.

Fuser/lower redrive/1st BTR retract motor removal

Remove the rear upper cover. See
1.
Remove the rear lower cover. See
2.
"Rear upper cover removal" on page
"Rear lower cover removal" on page
7558-xxx
4-19.
4-17.
Repair information
4-99
Previous
Next
Go Back