Sensor (Bridge Media Exit) Removal - Lexmark X95x Series Service Manual

Disconnect the cable (C) from the sensor (bridge media entrance).
6.
Remove the sensor (bridge media entrance).
7.

Sensor (bridge media exit) removal

1. Remove the bridge unit assembly. See
Remove the bridge de-curler top cover. See
2.
Remove the three screws (A) securing the long metal bracket to the machine.
3.
Note: When detaching the long metal bracket, you do not have to remove the harness from the clamps.
"Bridge unit assembly removal" on page
"Bridge decurler top cover removal" on page
7558-xxx
4-308.
4-305.
Repair information
4-317
Previous
Next
Go Back