Clamp Drive Motor Removal - Lexmark X95x Series Service Manual

Move the buffer pinch guide assembly (A) to the right to remove the two bosses from the holes in the
6.
finisher.

Clamp drive motor removal

Remove the rear upper cover. See
1.
2. Remove the upper media bin assembly. See
Remove the two media eject unit springs (A) attached to the media eject unit assembly (B) by pushing
3.
them downward.
Hole in rear frame
Boss
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
Right
A
A
4-383.
B
Repair information
7558-xxx
Previous
Next
Go Back
4-425.
4-343