Hcf Media Out Actuator Removal - Lexmark X95x Series Service Manual

7558-xxx
Lift the media long edge guide assembly (A) upward to release it from the hinges on the HCF media tray.
3.
4. Remove the media long edge guide assembly (A).
Note: With the media long edge guide assembly (A) removed, the wave washer (B) becomes detached.
E-clip
B
A

HCF media out actuator removal

Open the HCF top door.
1.
Open the HCF feed unit assembly.
2.
Remove the e-clip securing the media out actuator (A) to the HCF media feed unit assembly (B).
3.
Service Manual
4-438
Previous
Next
Go Back