Sensor (Printer Left Front Door Interlock) Removal - Lexmark X95x Series Service Manual

Disconnect the cable from the sensor (printer left duplex door interlock).
9.
Release the four tabs securing the sensor (printer left duplex door interlock) to the bracket.
10.
11. Remove the sensor (printer left duplex door interlock) from the bracket.

Sensor (printer left front door interlock) removal

Remove the printer front door. See
1.
2. Remove the transfer belt cleaner. See
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
Remove the operator panel front cover. See
6.
7. Remove the printhead retract door. See
Remove the inner cover. See
8.
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
4-13.
4-181.
4-148.
4-4.
Repair information
7558-xxx
Previous
Next
Go Back
4-8.
4-163