Automatic Document Feeder (Adf) Assembly Removal; Fb Ccd Sensor Assembly Removal - Lexmark X95x Series Service Manual

7558-xxx

Automatic document feeder (ADF) assembly removal

Disconnect the cable (A) from the flatbed scanner assembly.
1.
Lift the ADF assembly up and away from the flatbed scanner assembly.
2.
Gently press a tool against the plastic tab (B) as shown in the following image.
3.
4. Lift the ADF assembly and remove it from the machine.

FB CCD sensor assembly removal

Remove the large platen glass. See
1.
Remove the sensor (FB platen length). See
2.
Service Manual
4-230
"Large platen glass removal" on page
"Sensor (FB platen length) removal" on page
4-237.
4-266.
Previous
Next
Go Back