Booklet Media Entrance Drive Motor Removal - Lexmark X95x Series Service Manual

7558-xxx
Remove the booklet knife sector drive gear 42T (A).
5.
A

Booklet media entrance drive motor removal

Remove the booklet unit assembly. See
1.
Remove the screws securing the booklet media entrance drive motor cover from the booklet unit.
2.
Remove the booklet media entrance drive motor cover.
3.
Disconnect the connectors from the booklet media entrance drive motor (A).
4.
5. Remove the two screws securing the booklet media transport from the knife solenoid frame.
Service Manual
4-332
B
Rear
"Booklet unit chassis removal" on page 4-338.
Previous
Next
Go Back