7558-xxx
Detach the lower engine PCBA from the upper engine PCBA by moving it downward.
6.
Remove the lower engine PCBA.
7.
Replacement warning: When replacing the lower engine PCBA, ensure that all of the cables are properly
reconnected.
Lower redrive shift motor assembly removal
Remove the left upper cover. See
1.
2.
Remove the upper redrive assembly. See
Remove the fuser. See
3.
Remove the rear upper cover. See
4.
Remove the rear lower cover. See
5.
6.
Disconnect the input option cable (A).
Service Manual
4-108
"Left upper cover removal" on page
"Upper redrive assembly removal" on page
"Fuser assembly removal" on page
"Rear upper cover removal" on page
"Rear lower cover removal" on page
4-7.
4-192.
4-87.
4-19.
4-17.
Previous
Next
Go Back