Setting Lock Adjustor - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

a. If the Motor does not pivot down, or only
Tools Needed:
pivots down partially, the Detent Pin is set
too hard.
Flat Tip Screwdriver
Using a Flat Tip Screwdriver, turn the
Detent Pin counterclockwise in 1/8 turn
increments.
Operate the door to confirm adjustment.
Repeat procedure until Motor pivots to full
down position when the door is completely
closed.
b. If the Motor pivots down prematurely
(before the door is completely closed) or if
the Motor is "slapping" too aggressively
against the top of the door, the Detent Pin
is set too soft.
Using a flat tip screwdriver, turn the Detent
pin clockwise in 1/8 turn increments.
Operate the door to confirm adjustment.
Repeat procedure until motor pivots to full
down position when the door is completely
closed.
35

Setting Lock Adjustor

The Opener is designed to lock a fully closed
Tools Needed:
door by obstructing the door with the Motor
None
cover (Lock Adjustor). The locking feature
can be adjusted to properly interface with
your door.
The Lock Ring and Lock Adjustor are
assembled to the highest position. Once the
door and Opener have been installed and
the Opener has been programmed, the Lock
Adjustor needs to be adjusted. Unscrew the
Lock Adjustor until it is 1" from the top of
the door. Once the Lock Adjustor is set at
desired position, screw the Lock Ring down
to the Lock Adjustor to prevent it from
moving.
Disconnect the Opener and manually operate
the door to confirm door clears the Lock
Adjustor. Reconnect Opener and cycle the
door to make sure the Lock Adjustor does
not hit the door during the cycle sequence.
Adjust the Lock Adjustor accordingly.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Please Do Not Return This Product To The Store Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
Adjusting Detent
(Continued)
Detent Pin
Lock Adjustor
Motor
a
b
Lock Ring
Lock Adjustor
22