Attaching Diffuser; Connecting Opener Power Cord - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Tools Needed:

Screw a 75W (maximum) light bulb into

Light Socket and snap Diffuser into Light

None

Fixture.

When assembling Diffuser, make sure

all three Snap Tabs are aligned and fully

snapped into the three Mating Slots of

the Light Fixture.

Turn Receptacle power back on at fuse/

breaker box. The light should blink one

time when the power is turned back on.

NOTE: An accessory power outlet

receptacle (600 Watt Maximum) is

provided as part of the light fixture.

Connecting Opener Power Cord

Tools Needed:

Phillips head

TO REDUCE THE RISK OF ELECTRICAL

screwdriver

SHOCK, DO NOT ALTER THE PLUG IN ANY

WAY.

Plug the end of the Power Cord into the

nearest grounded power receptacle. (If the

Power Cord is not long enough to reach the

closest receptacle, contact a service person

for further options.) As soon as power is

applied to the Opener the Opener will beep

twice.

Excess Power Cord length must be routed

and contained safely away from any moving

parts.

NOTE: Do not permanently attach Power

Cord to building! Use only the Power Cord

Clips supplied with the Opener.

NOTE: If the 6' power cord will not reach an

electrical outlet, contact a local electrician

for further options.

NOTE: If permanet wiring is dersired, skip to

Step 39 for instructions.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Please Do Not Return This Product To The Store Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need