Programming The Light Fixture - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

29

Programming the Light Fixture

a. Press the Red Program Button on the
Tools Needed:
light fixture. The LED on the light
None
fixture will turn on and remain on for
30 seconds or until a Wall Station is
learned. The incandescent lamp will
also turn on when program button is
pushed.
b. Press the Light Button on the Wall
Station. This must be done within 30
seconds of pressing the program
button on the light fixture. The light
fixture lamp and LEDs will blink three
times to indicate successful
programming. The light fixture can now
be turned on and off from this Wall
Station.
NOTE: In order to program the Light
Fixture to the Opener, the installer must
have the Wall Station programmed to the
Opener.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Please Do Not Return This Product To The Store Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
Program Button
Light Button
18