Positioning The Light Fixture - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

25

Positioning the Light Fixture

WARNING
Tools Needed:
Phillips head
TO AVOID ELECTRICAL SHOCK
screwdriver
DISCONNECT POWER TO THE
RECEPTACLE AT THE FUSE/BREAKER
Flat Tip
BOX, BEFORE PROCEEDING WITH THE
Screwdriver
INSTALLATION OF THE LIGHT FIXTURE.
Receptacle Cover
IMPORTANT! This light fixture has a
grounding type plug with a third
(grounding) pin. This plug will only fit into
a grounding type outlet. If the plug does
Remove Screw
not fit into your outlet, contact a qualified
electrician to install the proper outlet. DO
NOT alter the plug in any way.
WARNING
TO AVOID ELECTRICAL SHOCK/FIRE, DO
NOT INSTALL THE LIGHT FIXTURE INTO A
RECEPTACLE WITH A METAL FACE
PLATE.
IMPORTANT! Door must clear Light
Fixture when the door is in the open
position.
The Light Fixture is designed to mount
directly to a standard 120V Duplex
Receptacle. Remove center Hole Plug
from Light Fixture (if installed) to expose
the Screw Hole.
Remove the center screw in the
Receptacle Cover. Holding Receptacle
Cover in place, insert Light Fixture into
the Receptacle that has the ground hole
#6-32 x 3/4"
Phillips Pan Head
farthest from center screw hole.
Screw
Secure Light Fixture to receptacle with a
#6-32 x 3/4" Phillips Pan Head Screw.
Hole Plug
Replace Hole Plug into the Screw Hole in
the Light Fixture.
NOTE: For temperature protection, the
Hole Plug must be in place prior to using
the Light Fixture.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
15
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need