Lubricating Gear Assemblies; Installing Opener - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

3

Lubricating Gear Assemblies

Lubricate both right hand and left
Tools Needed:
hand Gear Assembly teeth with the
None
grease provided.
Apply grease along the Torsion Tube
where the Opener will mount.
4
Place the Opener over the Torsion Tube
Tools Needed:
and between the two Gear Assemblies.
None
Center the Mounting Bracket on the
Mounting Surface.
To ease installation, position the Gear
Assemblies so the 3/8" Square Head
Bolts are accessible from the front.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Please Do Not Return This Product To The Store Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need

Installing Opener

Torsion
Tube
Mounting
Surface
Square
Head Bolt
Grease
Packet
Torsion Tube
Mounting
Bracket
2