Setting Trolley Close Position - Wayne-Dalton Prodrive 3220C Installation Instructions And Owner's Manual

17

Setting Trolley Close Position

Tools Needed:
TO AVOID POSSIBLE INJURY OR
Pliers/Wire Cutters
PROPERTY DAMAGE, KEEP PEOPLE AND
OBJECTS CLEAR OF THE MOVING DOOR
Tape Measure
ARM.
Flat Tip
NOTE: If necessary, activate the opener
Screwdriver
to move the trolley/ upper door arm to the
closed position.
NOTE: If you have a 9100, 9400,9600,
5120, 5140 or 9700 series door, with one of
the door brackets shown at the right and a
Torquemaster
counterbalance system, see "Setting Trolley
Close Position/ Connecting Door Arm To
Door" on pages 23-24. If not, complete this
step.
NOTE: If you have a 9100, 9400, 9600,
5120, 5140 or 9700 series door, with one of
the door brackets shown at the right and a
Torsion Spring(s), see "Setting Trolley Close
Position/ Connecting Door Arm To Door" on
pages 25-26. If not, complete this step.
Trolley and latch assembly must be at the
factory preset fully closed position, (see
illustration).
Verify preliminary trolley and latch assembly
close position is 11" to 13" between trolley
clevis pin and the inside face of the door.
If adjustment of the trolley/latch assembly
position is required, use the close travel
adjustment screw located on the bottom of
the opener. A 1/4 turn equals approximately
1" of trolley travel; turn clockwise to de-
crease distance between header and trolley
and counter-clockwise to increase distance
between header and trolley.
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
WARNING
® or Extension Spring(s)
Single and Double Tab Door Brackets
Models: 9100, 9400, 9600, 5120 and 5140.
Double Tab Single Tab
Bracket Bracket
11" to 13"
(13" Minimum
For Belt Drive)
Door Bracket
TRAVEL ADJUSTMENT
OPEN CLOSE
LESS
MORE
MORE
Model: 9700
Double Tab
Bracket
Trolley
(Closed Limit Position)
Upper Arm
Tag
Release Cord
Pull Knob
Bottom Of Opener
Single Tab
Bracket
13