Installing Cable Keepers
Tools Needed:
Fasten the Cable Keeper Assemblies with
Drill with 1/8" bit
(2) 1/4 x 11/16" self drilling screws (wood
doors will use (2) 1/4 x 1" lag screws).
7/16" Socket
Driver
Once the Cable Keeper Assemblies are
secured to the section, place the Plastic
Sleeve over the Counterbalance Cable and
then rotate the Cable Keeper Arm upward
and attach it to the Plastic Sleeve.
Repeat for the left hand (Red) Cable
Keeper Assembly.
NOTE: It is recommended that wood doors
be pre-drilled with 1/8" pilot holes prior to
fastening.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Please Do Not Return This Product To The Store Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
(Continued)
Cable Keeper
Assembly
(2) 1/4 x 11/16"
Self Drilling Screws
Cable Keeper Arm
Plastic
Sleeve
Counterbalance
Cable
Cable Keeper
Arm
Cable Keeper
Assembly
(Installed)
Counterbalance
Cable
Plastic
Sleeve
14