Attaching Disconnect Cables; Threading Disconnect Cable Guide Bracket - Wayne-Dalton IDrive 3651-372 Installation Instructions And Owner's Manual

9

Attaching Disconnect Cables

Attach the loose Disconnect Cable, from
Tools Needed:
the hardware kit, to the attached
Pliers
Disconnect Cable using the "S" Hook.
Close both ends of the "S" Hook to lock
the cables together.
10
Threading Disconnect Cable
Thread the Disconnect Cable Guide
Tools Needed:
Bracket onto the Disconnect Cable
None
making sure the proper hole is used.
• For 2" to 2-1/8" torsion tube to header
offset, use the hole closest to the
flange.
• For 2-7/8" torsion tube to header
offset, use the hole farthest from the
flange.
NOTE: Depending on the type of door
hardware present, it may be necessary
to drill a hole in the right side flagangle
and/or End Bearing Bracket for routing
the Disconnect Cable.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
5
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
Guide Bracket
Disconnect Cable
Guide Bracket
Mounting Surface
Disconnect Cable
Guide Bracket
2"- 2-7/8"
Min
Top View
Close S-Hook
Flagangle
2" offset
2-1/8" offset
2-7/8" offset